Vistas, Domain 2 Refined ISURFT=45 (722140), IUPT=5 (72214), NUSTA=10, NOWSTA=9, NSSTA=100, NPSTA=92 ---------------- Run title (3 lines) ------------------------------------------ CALMET MODEL CONTROL FILE -------------------------- ------------------------------------------------------------------------------- INPUT GROUP: 0 -- Input and Output File Names Subgroup (a) ------------ Default Name Type File Name ------------ ---- --------- GEO.DAT input ! GEODAT=geo-domain2-4km-comb-g.dat ! SURF.DAT input ! SRFDAT=surf2002dom2.dat ! CLOUD.DAT input * CLDDAT= * PRECIP.DAT input ! PRCDAT=precip2002dom2.dat ! WT.DAT input * WTDAT= * CALMET.LST output ! METLST=met2002-dom2-01a.lst ! CALMET.DAT output ! METDAT=met2002-dom2-01a.dat ! PACOUT.DAT output * PACDAT= * All file names will be converted to lower case if LCFILES = T Otherwise, if LCFILES = F, file names will be converted to UPPER CASE T = lower case ! LCFILES = T ! F = UPPER CASE NUMBER OF UPPER AIR and OVERWATER STATIONS Number of upper air stations (NUSTA) No default ! NUSTA = 10 ! Number of overwater met stations (NOWSTA) No default ! NOWSTA = 9 ! NUMBER OF PROGNOSTIC and IGF-CALMET FILEs: Number of MM4/MM5/M3D.DAT files (NM3D) No default ! NM3D = 2 ! Number of IGF-CALMET.DAT files (NIGF) No default ! NIGF = 0 ! !END! -------------------------------------------------------------------------------- Subgroup (b) --------------------------------- Upper air files (one per station) --------------------------------- Default Name Type File Name ------------ ---- --------- UP1.DAT input 1 ! UPDAT=72201-2002.dat! !END! UP2.DAT input 2 ! UPDAT=72202-2002.dat! !END! UP3.DAT input 3 ! UPDAT=72206-2002.dat! !END! UP4.DAT input 4 ! UPDAT=72210-2002.dat! !END! UP5.DAT input 5 ! UPDAT=72214-2002.dat! !END! UP6.DAT input 6 ! UPDAT=72215-2002.dat! !END! UP7.DAT input 7 ! UPDAT=72230-2002.dat! !END! UP8.DAT input 8 ! UPDAT=72233-2002.dat! !END! UP9.DAT input 9 ! UPDAT=72235-2002.dat! !END! UP10.DAT input 10 ! UPDAT=74794-2002.dat! !END! -------------------------------------------------------------------------------- Subgroup (c) ----------------------------------------- Overwater station files (one per station) ----------------------------------------- Default Name Type File Name ------------ ---- --------- SEA1.DAT input 1 ! SEADAT= 42007.DAT! !END! SEA2.DAT input 2 ! SEADAT= 42040.DAT! !END! SEA3.DAT input 3 ! SEADAT= 42001.DAT! !END! SEA4.DAT input 4 ! SEADAT= 42039.DAT! !END! SEA5.DAT input 5 ! SEADAT= 42036.DAT! !END! SEA6.DAT input 6 ! SEADAT= 42003.DAT! !END! SEA7.DAT input 7 ! SEADAT= 41008.DAT! !END! SEA8.DAT input 8 ! SEADAT= 41009.DAT! !END! SEA9.DAT input 9 ! SEADAT= 41012.DAT! !END! -------------------------------------------------------------------------------- Subgroup (d) ------------------------------------------------- MM4/MM5/M3D.DAT files (consecutive or overlapping) ------------------------------------------------- Default Name Type File Name ------------ ---- --------- MM51.DAT input 1 ! M3DDAT=2002.12/mm5d22002_001.m3d! !END! MM52.DAT input 2 ! M3DDAT=2002.12/mm5d22002_002.m3d! !END! -------------------------------------------------------------------------------- Subgroup (e) ---------------- IGF-CALMET.DAT files (consecutive or overlapping) ----------------------------------------- Default Name Type File Name ------------ ---- --------- IGFn.DAT input * IGFDAT=CALMET0.DAT * *END* -------------------------------------------------------------------------------- Subgroup (f) ---------------- Other file names ---------------- Default Name Type File Name ------------ ---- --------- DIAG.DAT input * DIADAT= * PROG.DAT input * PRGDAT= * TEST.PRT output * TSTPRT= * TEST.OUT output * TSTOUT= * TEST.KIN output * TSTKIN= * TEST.FRD output * TSTFRD= * TEST.SLP output * TSTSLP= * DCST.GRD output * DCSTGD= * -------------------------------------------------------------------------------- NOTES: (1) File/path names can be up to 70 characters in length (2) Subgroups (a) and (e) must have ONE 'END' (surround by delimiters) at the end of the group (3) Subgroups (b) through (d) are included ONLY if the corresponding number of files (NUSTA, NOWSTA, NM3D) is not 0, and each must have an 'END' (surround by delimiters) at the end of EACH LINE !END! ------------------------------------------------------------------------------- INPUT GROUP: 1 -- General run control parameters -------------- Starting date: Year (IBYR) -- No default ! IBYR= 2002 ! Month (IBMO) -- No default ! IBMO= 1 ! Day (IBDY) -- No default ! IBDY= 1 ! Hour (IBHR) -- No default ! IBHR= 1 ! Base time zone (IBTZ) -- No default ! IBTZ= 5 ! PST = 08, MST = 07 CST = 06, EST = 05 Length of run (hours) (IRLG) -- No default ! IRLG= 240 ! Run type (IRTYPE) -- Default: 1 ! IRTYPE= 1 ! 0 = Computes wind fields only 1 = Computes wind fields and micrometeorological variables (u*, w*, L, zi, etc.) (IRTYPE must be 1 to run CALPUFF or CALGRID) Compute special data fields required by CALGRID (i.e., 3-D fields of W wind components and temperature) in additional to regular Default: T ! LCALGRD = T ! fields ? (LCALGRD) (LCALGRD must be T to run CALGRID) Flag to stop run after SETUP phase (ITEST) Default: 2 ! ITEST= 2 ! (Used to allow checking of the model inputs, files, etc.) ITEST = 1 - STOPS program after SETUP phase ITEST = 2 - Continues with execution of COMPUTATIONAL phase after SETUP !END! ------------------------------------------------------------------------------- INPUT GROUP: 2 -- Map Projection and Grid control parameters -------------- Projection for all (X,Y): ------------------------- Map projection (PMAP) Default: UTM ! PMAP = LCC ! UTM : Universal Transverse Mercator TTM : Tangential Transverse Mercator LCC : Lambert Conformal Conic PS : Polar Stereographic EM : Equatorial Mercator LAZA : Lambert Azimuthal Equal Area False Easting and Northing (km) at the projection origin (Used only if PMAP= TTM, LCC, or LAZA) (FEAST) Default=0.0 ! FEAST = 0.000 ! (FNORTH) Default=0.0 ! FNORTH = 0.000 ! UTM zone (1 to 60) (Used only if PMAP=UTM) (IUTMZN) No Default ! IUTMZN = -999 ! Hemisphere for UTM projection? (Used only if PMAP=UTM) (UTMHEM) Default: N ! UTMHEM = N ! N : Northern hemisphere projection S : Southern hemisphere projection Latitude and Longitude (decimal degrees) of projection origin (Used only if PMAP= TTM, LCC, PS, EM, or LAZA) (RLAT0) No Default ! RLAT0 = 40N ! (RLON0) No Default ! RLON0 = 97W ! TTM : RLON0 identifies central (true N/S) meridian of projection RLAT0 selected for convenience LCC : RLON0 identifies central (true N/S) meridian of projection RLAT0 selected for convenience PS : RLON0 identifies central (grid N/S) meridian of projection RLAT0 selected for convenience EM : RLON0 identifies central meridian of projection RLAT0 is REPLACED by 0.0N (Equator) LAZA: RLON0 identifies longitude of tangent-point of mapping plane RLAT0 identifies latitude of tangent-point of mapping plane Matching parallel(s) of latitude (decimal degrees) for projection (Used only if PMAP= LCC or PS) (XLAT1) No Default ! XLAT1 = 33N ! (XLAT2) No Default ! XLAT2 = 45N ! LCC : Projection cone slices through Earth's surface at XLAT1 and XLAT2 PS : Projection plane slices through Earth at XLAT1 (XLAT2 is not used) ---------- Note: Latitudes and longitudes should be positive, and include a letter N,S,E, or W indicating north or south latitude, and east or west longitude. For example, 35.9 N Latitude = 35.9N 118.7 E Longitude = 118.7E Datum-region ------------ The Datum-Region for the coordinates is identified by a character string. Many mapping products currently available use the model of the Earth known as the World Geodetic System 1984 (WGS-84). Other local models may be in use, and their selection in CALMET will make its output consistent with local mapping products. The list of Datum-Regions with official transformation parameters is provided by the National Imagery and Mapping Agency (NIMA). NIMA Datum - Regions(Examples) ------------------------------------------------------------------------------ WGS-84 WGS-84 Reference Ellipsoid and Geoid, Global coverage (WGS84) NAS-C NORTH AMERICAN 1927 Clarke 1866 Spheroid, MEAN FOR CONUS (NAD27) NAR-C NORTH AMERICAN 1983 GRS 80 Spheroid, MEAN FOR CONUS (NAD83) NWS-84 NWS 6370KM Radius, Sphere ESR-S ESRI REFERENCE 6371KM Radius, Sphere Datum-region for output coordinates (DATUM) Default: WGS-84 ! DATUM = NWS-84 ! Horizontal grid definition: --------------------------- Rectangular grid defined for projection PMAP, with X the Easting and Y the Northing coordinate No. X grid cells (NX) No default ! NX = 263 ! No. Y grid cells (NY) No default ! NY = 206 ! Grid spacing (DGRIDKM) No default ! DGRIDKM = 4. ! Units: km Reference grid coordinate of SOUTHWEST corner of grid cell (1,1) X coordinate (XORIGKM) No default ! XORIGKM = 721.995 ! Y coordinate (YORIGKM) No default ! YORIGKM = -1598.000 ! Units: km Vertical grid definition: ------------------------- No. of vertical layers (NZ) No default ! NZ = 10 ! Cell face heights in arbitrary vertical grid (ZFACE(NZ+1)) No defaults Units: m ! ZFACE = 0.,20.,40.,80.,160.,320.,640.,1200.,2000.,3000.,4000. ! !END! ------------------------------------------------------------------------------- INPUT GROUP: 3 -- Output Options -------------- DISK OUTPUT OPTION Save met. fields in an unformatted output file ? (LSAVE) Default: T ! LSAVE = T ! (F = Do not save, T = Save) Type of unformatted output file: (IFORMO) Default: 1 ! IFORMO = 1 ! 1 = CALPUFF/CALGRID type file (CALMET.DAT) 2 = MESOPUFF-II type file (PACOUT.DAT) LINE PRINTER OUTPUT OPTIONS: Print met. fields ? (LPRINT) Default: F ! LPRINT = F ! (F = Do not print, T = Print) (NOTE: parameters below control which met. variables are printed) Print interval (IPRINF) in hours Default: 1 ! IPRINF = 1 ! (Meteorological fields are printed every 1 hours) Specify which layers of U, V wind component to print (IUVOUT(NZ)) -- NOTE: NZ values must be entered (0=Do not print, 1=Print) (used only if LPRINT=T) Defaults: NZ*0 ! IUVOUT = 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ! ----------------------- Specify which levels of the W wind component to print (NOTE: W defined at TOP cell face -- 10 values) (IWOUT(NZ)) -- NOTE: NZ values must be entered (0=Do not print, 1=Print) (used only if LPRINT=T & LCALGRD=T) ----------------------------------- Defaults: NZ*0 ! IWOUT = 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ! Specify which levels of the 3-D temperature field to print (ITOUT(NZ)) -- NOTE: NZ values must be entered (0=Do not print, 1=Print) (used only if LPRINT=T & LCALGRD=T) ----------------------------------- Defaults: NZ*0 ! ITOUT = 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ! Specify which meteorological fields to print (used only if LPRINT=T) Defaults: 0 (all variables) ----------------------- Variable Print ? (0 = do not print, 1 = print) -------- ------------------ ! STABILITY = 0 ! - PGT stability class ! USTAR = 0 ! - Friction velocity ! MONIN = 0 ! - Monin-Obukhov length ! MIXHT = 0 ! - Mixing height ! WSTAR = 0 ! - Convective velocity scale ! PRECIP = 0 ! - Precipitation rate ! SENSHEAT = 0 ! - Sensible heat flux ! CONVZI = 0 ! - Convective mixing ht. Testing and debug print options for micrometeorological module Print input meteorological data and internal variables (LDB) Default: F ! LDB = F ! (F = Do not print, T = print) (NOTE: this option produces large amounts of output) First time step for which debug data are printed (NN1) Default: 1 ! NN1 = 1 ! Last time step for which debug data are printed (NN2) Default: 1 ! NN2 = 1 ! Print distance to land internal variables (LDBCST) Default: F ! LDBCST = F ! (F = Do not print, T = print) (Output in .GRD file DCST.GRD, defined in input group 0) Testing and debug print options for wind field module (all of the following print options control output to wind field module's output files: TEST.PRT, TEST.OUT, TEST.KIN, TEST.FRD, and TEST.SLP) Control variable for writing the test/debug wind fields to disk files (IOUTD) (0=Do not write, 1=write) Default: 0 ! IOUTD = 0 ! Number of levels, starting at the surface, to print (NZPRN2) Default: 1 ! NZPRN2 = 0 ! Print the INTERPOLATED wind components ? (IPR0) (0=no, 1=yes) Default: 0 ! IPR0 = 0 ! Print the TERRAIN ADJUSTED surface wind components ? (IPR1) (0=no, 1=yes) Default: 0 ! IPR1 = 0 ! Print the SMOOTHED wind components and the INITIAL DIVERGENCE fields ? (IPR2) (0=no, 1=yes) Default: 0 ! IPR2 = 0 ! Print the FINAL wind speed and direction fields ? (IPR3) (0=no, 1=yes) Default: 0 ! IPR3 = 0 ! Print the FINAL DIVERGENCE fields ? (IPR4) (0=no, 1=yes) Default: 0 ! IPR4 = 0 ! Print the winds after KINEMATIC effects are added ? (IPR5) (0=no, 1=yes) Default: 0 ! IPR5 = 0 ! Print the winds after the FROUDE NUMBER adjustment is made ? (IPR6) (0=no, 1=yes) Default: 0 ! IPR6 = 0 ! Print the winds after SLOPE FLOWS are added ? (IPR7) (0=no, 1=yes) Default: 0 ! IPR7 = 0 ! Print the FINAL wind field components ? (IPR8) (0=no, 1=yes) Default: 0 ! IPR8 = 0 ! !END! ------------------------------------------------------------------------------- INPUT GROUP: 4 -- Meteorological data options -------------- NO OBSERVATION MODE (NOOBS) Default: 0 ! NOOBS = 0 ! 0 = Use surface, overwater, and upper air stations 1 = Use surface and overwater stations (no upper air observations) Use MM4/MM5/M3D for upper air data 2 = No surface, overwater, or upper air observations Use MM4/MM5/M3D for surface, overwater, and upper air data NUMBER OF SURFACE & PRECIP. METEOROLOGICAL STATIONS Number of surface stations (NSSTA) No default ! NSSTA = 100 ! Number of precipitation stations (NPSTA=-1: flag for use of MM5/M3D precip data) (NPSTA) No default ! NPSTA = 92 ! CLOUD DATA OPTIONS Gridded cloud fields: (ICLOUD) Default: 0 ! ICLOUD = 0 ! ICLOUD = 0 - Gridded clouds not used ICLOUD = 1 - Gridded CLOUD.DAT generated as OUTPUT ICLOUD = 2 - Gridded CLOUD.DAT read as INPUT ICLOUD = 3 - Gridded cloud cover from Prognostic Rel. Humidity FILE FORMATS Surface meteorological data file format (IFORMS) Default: 2 ! IFORMS = 2 ! (1 = unformatted (e.g., SMERGE output)) (2 = formatted (free-formatted user input)) Precipitation data file format (IFORMP) Default: 2 ! IFORMP = 2 ! (1 = unformatted (e.g., PMERGE output)) (2 = formatted (free-formatted user input)) Cloud data file format (IFORMC) Default: 2 ! IFORMC = 2 ! (1 = unformatted - CALMET unformatted output) (2 = formatted - free-formatted CALMET output or user input) !END! ------------------------------------------------------------------------------- INPUT GROUP: 5 -- Wind Field Options and Parameters -------------- WIND FIELD MODEL OPTIONS Model selection variable (IWFCOD) Default: 1 ! IWFCOD = 1 ! 0 = Objective analysis only 1 = Diagnostic wind module Compute Froude number adjustment effects ? (IFRADJ) Default: 1 ! IFRADJ = 1 ! (0 = NO, 1 = YES) Compute kinematic effects ? (IKINE) Default: 0 ! IKINE = 0 ! (0 = NO, 1 = YES) Use O'Brien procedure for adjustment of the vertical velocity ? (IOBR) Default: 0 ! IOBR = 0 ! (0 = NO, 1 = YES) Compute slope flow effects ? (ISLOPE) Default: 1 ! ISLOPE = 1 ! (0 = NO, 1 = YES) Extrapolate surface wind observations to upper layers ? (IEXTRP) Default: -4 ! IEXTRP = -4 ! (1 = no extrapolation is done, 2 = power law extrapolation used, 3 = user input multiplicative factors for layers 2 - NZ used (see FEXTRP array) 4 = similarity theory used -1, -2, -3, -4 = same as above except layer 1 data at upper air stations are ignored Extrapolate surface winds even if calm? (ICALM) Default: 0 ! ICALM = 0 ! (0 = NO, 1 = YES) Layer-dependent biases modifying the weights of surface and upper air stations (BIAS(NZ)) -1<=BIAS<=1 Negative BIAS reduces the weight of upper air stations (e.g. BIAS=-0.1 reduces the weight of upper air stations by 10%; BIAS= -1, reduces their weight by 100 %) Positive BIAS reduces the weight of surface stations (e.g. BIAS= 0.2 reduces the weight of surface stations by 20%; BIAS=1 reduces their weight by 100%) Zero BIAS leaves weights unchanged (1/R**2 interpolation) Default: NZ*0 ! BIAS = 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ! Minimum distance from nearest upper air station to surface station for which extrapolation of surface winds at surface station will be allowed (RMIN2: Set to -1 for IEXTRP = 4 or other situations where all surface stations should be extrapolated) Default: 4. ! RMIN2 = -1.0 ! Use gridded prognostic wind field model output fields as input to the diagnostic wind field model (IPROG) Default: 0 ! IPROG = 14 ! (0 = No, [IWFCOD = 0 or 1] 1 = Yes, use CSUMM prog. winds as Step 1 field, [IWFCOD = 0] 2 = Yes, use CSUMM prog. winds as initial guess field [IWFCOD = 1] 3 = Yes, use winds from MM4.DAT file as Step 1 field [IWFCOD = 0] 4 = Yes, use winds from MM4.DAT file as initial guess field [IWFCOD = 1] 5 = Yes, use winds from MM4.DAT file as observations [IWFCOD = 1] 13 = Yes, use winds from MM5/M3D.DAT file as Step 1 field [IWFCOD = 0] 14 = Yes, use winds from MM5/M3D.DAT file as initial guess field [IWFCOD = 1] 15 = Yes, use winds from MM5/M3D.DAT file as observations [IWFCOD = 1] 24 = Yes, use winds from existing CALMET.DAT file as intial guess field [IWFCOD = 1] Timestep (hours) of the prognostic model input data (ISTEPPG) Default: 1 ! ISTEPPG = 1 ! Use coarse CALMET fields as initial guess fields (IGFMET) (overwrites IGF based on prognostic wind fields if any) Default:0 ! IGFMET = 0 ! RADIUS OF INFLUENCE PARAMETERS Use varying radius of influence Default: F ! LVARY = F! (if no stations are found within RMAX1,RMAX2, or RMAX3, then the closest station will be used) Maximum radius of influence over land in the surface layer (RMAX1) No default ! RMAX1 = 40. ! Units: km Maximum radius of influence over land aloft (RMAX2) No default ! RMAX2 = 40. ! Units: km Maximum radius of influence over water (RMAX3) No default ! RMAX3 = 100. ! Units: km OTHER WIND FIELD INPUT PARAMETERS Minimum radius of influence used in the wind field interpolation (RMIN) Default: 0.1 ! RMIN = 0.1 ! Units: km Radius of influence of terrain features (TERRAD) No default ! TERRAD = 15. ! Units: km Relative weighting of the first guess field and observations in the SURFACE layer (R1) No default ! R1 = 5. ! (R1 is the distance from an Units: km observational station at which the observation and first guess field are equally weighted) Relative weighting of the first guess field and observations in the layers ALOFT (R2) No default ! R2 = 5. ! (R2 is applied in the upper layers Units: km in the same manner as R1 is used in the surface layer). Relative weighting parameter of the prognostic wind field data (RPROG) No default ! RPROG = 0. ! (Used only if IPROG = 1) Units: km ------------------------ Maximum acceptable divergence in the divergence minimization procedure (DIVLIM) Default: 5.E-6 ! DIVLIM= 5.0E-06 ! Maximum number of iterations in the divergence min. procedure (NITER) Default: 50 ! NITER = 50 ! Number of passes in the smoothing procedure (NSMTH(NZ)) NOTE: NZ values must be entered Default: 2,(mxnz-1)*4 ! NSMTH = 2 , 4 , 4 , 4 , 4 , 4 , 4 , 4 , 4 , 4 ! Maximum number of stations used in each layer for the interpolation of data to a grid point (NINTR2(NZ)) NOTE: NZ values must be entered Default: 99. ! NINTR2 = 99 , 99 , 99 , 99 , 99 , 99 , 99 , 99 , 99 , 99 ! Critical Froude number (CRITFN) Default: 1.0 ! CRITFN = 1. ! Empirical factor controlling the influence of kinematic effects (ALPHA) Default: 0.1 ! ALPHA = 0.1 ! Multiplicative scaling factor for extrapolation of surface observations to upper layers (FEXTR2(NZ)) Default: NZ*0.0 ! FEXTR2 = 0., 0., 0., 0., 0., 0., 0., 0., 0., 0. ! (Used only if IEXTRP = 3 or -3) BARRIER INFORMATION Number of barriers to interpolation of the wind fields (NBAR) Default: 0 ! NBAR = 0 ! Level (1 to NZ) up to which barriers apply (KBAR) Default: NZ ! KBAR = 10 ! THE FOLLOWING 4 VARIABLES ARE INCLUDED ONLY IF NBAR > 0 NOTE: NBAR values must be entered No defaults for each variable Units: km X coordinate of BEGINNING of each barrier (XBBAR(NBAR)) ! XBBAR = 0. ! Y coordinate of BEGINNING of each barrier (YBBAR(NBAR)) ! YBBAR = 0. ! X coordinate of ENDING of each barrier (XEBAR(NBAR)) ! XEBAR = 0. ! Y coordinate of ENDING of each barrier (YEBAR(NBAR)) ! YEBAR = 0. ! DIAGNOSTIC MODULE DATA INPUT OPTIONS Surface temperature (IDIOPT1) Default: 0 ! IDIOPT1 = 0 ! 0 = Compute internally from hourly surface observations 1 = Read preprocessed values from a data file (DIAG.DAT) Surface met. station to use for the surface temperature (ISURFT) No default ! ISURFT = 45 ! (Must be a value from 1 to NSSTA) (Used only if IDIOPT1 = 0) -------------------------- Domain-averaged temperature lapse rate (IDIOPT2) Default: 0 ! IDIOPT2 = 0 ! 0 = Compute internally from twice-daily upper air observations 1 = Read hourly preprocessed values from a data file (DIAG.DAT) Upper air station to use for the domain-scale lapse rate (IUPT) No default ! IUPT = 5 ! (Must be a value from 1 to NUSTA) (Used only if IDIOPT2 = 0) -------------------------- Depth through which the domain-scale lapse rate is computed (ZUPT) Default: 200. ! ZUPT = 200. ! (Used only if IDIOPT2 = 0) Units: meters -------------------------- Domain-averaged wind components (IDIOPT3) Default: 0 ! IDIOPT3 = 0 ! 0 = Compute internally from twice-daily upper air observations 1 = Read hourly preprocessed values a data file (DIAG.DAT) Upper air station to use for the domain-scale winds (IUPWND) Default: -1 ! IUPWND = -1 ! (Must be a value from -1 to NUSTA) (Used only if IDIOPT3 = 0) -------------------------- Bottom and top of layer through which the domain-scale winds are computed (ZUPWND(1), ZUPWND(2)) Defaults: 1., 1000. ! ZUPWND= 1., 1000. ! (Used only if IDIOPT3 = 0) Units: meters -------------------------- Observed surface wind components for wind field module (IDIOPT4) Default: 0 ! IDIOPT4 = 0 ! 0 = Read WS, WD from a surface data file (SURF.DAT) 1 = Read hourly preprocessed U, V from a data file (DIAG.DAT) Observed upper air wind components for wind field module (IDIOPT5) Default: 0 ! IDIOPT5 = 0 ! 0 = Read WS, WD from an upper air data file (UP1.DAT, UP2.DAT, etc.) 1 = Read hourly preprocessed U, V from a data file (DIAG.DAT) LAKE BREEZE INFORMATION Use Lake Breeze Module (LLBREZE) Default: F ! LLBREZE = F ! Number of lake breeze regions (NBOX) ! NBOX = 0 ! X Grid line 1 defining the region of interest ! XG1 = 0. ! X Grid line 2 defining the region of interest ! XG2 = 0. ! Y Grid line 1 defining the region of interest ! YG1 = 0. ! Y Grid line 2 defining the region of interest ! YG2 = 0. ! X Point defining the coastline (Straight line) (XBCST) (KM) Default: none ! XBCST = 0. ! Y Point defining the coastline (Straight line) (YBCST) (KM) Default: none ! YBCST = 0. ! X Point defining the coastline (Straight line) (XECST) (KM) Default: none ! XECST = 0. ! Y Point defining the coastline (Straight line) (YECST) (KM) Default: none ! YECST = 0. ! Number of stations in the region Default: none ! NLB = 0 ! (Surface stations + upper air stations) Station ID's in the region (METBXID(NLB)) (Surface stations first, then upper air stations) ! METBXID = 0 ! !END! ------------------------------------------------------------------------------- INPUT GROUP: 6 -- Mixing Height, Temperature and Precipitation Parameters -------------- EMPIRICAL MIXING HEIGHT CONSTANTS Neutral, mechanical equation (CONSTB) Default: 1.41 ! CONSTB = 1.41 ! Convective mixing ht. equation (CONSTE) Default: 0.15 ! CONSTE = 0.15 ! Stable mixing ht. equation (CONSTN) Default: 2400. ! CONSTN = 2400.! Overwater mixing ht. equation (CONSTW) Default: 0.16 ! CONSTW = 0.16 ! Absolute value of Coriolis parameter (FCORIOL) Default: 1.E-4 ! FCORIOL = 1.0E-04! Units: (1/s) SPATIAL AVERAGING OF MIXING HEIGHTS Conduct spatial averaging (IAVEZI) (0=no, 1=yes) Default: 1 ! IAVEZI = 1 ! Max. search radius in averaging process (MNMDAV) Default: 1 ! MNMDAV = 1 ! Units: Grid cells Half-angle of upwind looking cone for averaging (HAFANG) Default: 30. ! HAFANG = 30. ! Units: deg. Layer of winds used in upwind averaging (ILEVZI) Default: 1 ! ILEVZI = 1 ! (must be between 1 and NZ) CONVECTIVE MIXING HEIGHT OPTIONS: Method to compute the convective ! IMIXH = 1 ! mixing height (IMIHXH) 1: Maul-Carson for land and water cells -1: Maul-Carson for land cells only - OCD mixing height overwater 2: Batchvarova and Gryning for land and water cells -2: Batchvarova and Gryning for land cells only OCD mixing height overwater Threshold buoyancy flux required to sustain convective mixing height growth overland (THRESHL) Default: 0.05 !THRESHL = 0.05 ! (expressed as a heat flux per meter of (units: W/m3) boundary layer i.e. W/m3;) Threshold buoyancy flux required to sustain convective mixing height growth overwater (THRESHW) Default: 0.05 !THRESHW = 0.05 ! (expressed as a heat flux per meter of (units: W/m3) marine boundary layer i.e. W/m3;) Option for overwater temperature (ITWPROG) !ITWPROG=0 ! Default: 0 0 : use SEA.DAT lapse rates and deltaT (or assume neutral conditions if missing) 1 : use prognostic lapse rates (only if IPROG>2) and SEA.DAT deltaT (or neutral if missing) 2 : use prognostic lapse rates and prognostic delta T (only if iprog>12 and 3D.DAT version# 2.0 or higher) Land Use category ocean in 3D.DAT datasets (ILUOC3D) !ILUOC3D=16! (only used if itwprog=2) - (integer) (Note if 3D.DAT from MM5 version 3.0, iluoc=16) OTHER MIXING HEIGHT VARIABLES Minimum potential temperature lapse rate in the stable layer above the current convective mixing ht. Default: 0.001 ! DPTMIN = 0.001 ! (DPTMIN) Units: deg. K/m Depth of layer above current conv. mixing height through which lapse Default: 200. ! DZZI = 200. ! rate is computed (DZZI) Units: meters Minimum overland mixing height Default: 50. ! ZIMIN = 50. ! (ZIMIN) Units: meters Maximum overland mixing height Default: 3000. ! ZIMAX = 3000. ! (ZIMAX) Units: meters Minimum overwater mixing height Default: 50. ! ZIMINW = 50. ! (ZIMINW) -- (Not used if observed Units: meters overwater mixing hts. are used) Maximum overwater mixing height Default: 3000. ! ZIMAXW = 3000. ! (ZIMAXW) -- (Not used if observed Units: meters overwater mixing hts. are used) OVERWATER SURFACE FLUXES METHOD and PARAMETERS (ICOARE) Default: 10 !ICOARE=10! 0: original deltaT method (OCD) 10: COARE with no wave parameterization (jwave=0, Charnock) 11: COARE with wave option jwave=1 (Oost et al) and default wave properties -11: COARE with wave option jwave=1 (Oost et al) and observed wave properties (must be in SEA.DAT files) 12: COARE with wave option 2 (Taylor and Yelland) and default wave properties -12: COARE with wave option 2 (Taylor and Yelland) and observed wave properties (must be in SEA.DAT files) Coastal/Shallow water length scale (DSHELF) (for modified z0 in shallow water) ( COARE fluxes only) Default : 0. !DSHELF=0.! Units: km COARE warm layer computation (IWARM) !IWARM=0! 1: on - 0: off (must be off if SST measured with IR radiometer) Default: 0 COARE cool skin layer computation (ICOOL) !ICOOL=0! 1: on - 0: off (must be off if SST measured with IR radiometer) Default: 0 TEMPERATURE PARAMETERS 3D temperature from observations or from prognostic data? (ITPROG) Default:0 !ITPROG = 0 ! 0 = Use Surface and upper air stations (only if NOOBS = 0) 1 = Use Surface stations (no upper air observations) Use MM5/M3D for upper air data (only if NOOBS = 0,1) 2 = No surface or upper air observations Use MM5/M3D for surface and upper air data (only if NOOBS = 0,1,2) Interpolation type (1 = 1/R ; 2 = 1/R**2) Default:1 ! IRAD = 1 ! Radius of influence for temperature interpolation (TRADKM) Default: 500. ! TRADKM = 500. ! Units: km Maximum Number of stations to include in temperature interpolation (NUMTS) Default: 5 ! NUMTS = 5 ! Conduct spatial averaging of temp- eratures (IAVET) (0=no, 1=yes) Default: 1 ! IAVET = 1 ! (will use mixing ht MNMDAV,HAFANG so make sure they are correct) Default temperature gradient Default: -.0098 ! TGDEFB = -0.0098 ! below the mixing height over water (K/m) (TGDEFB) Default temperature gradient Default: -.0045 ! TGDEFA = -0.0045 ! above the mixing height over water (K/m) (TGDEFA) Beginning (JWAT1) and ending (JWAT2) land use categories for temperature ! JWAT1 = 55 ! interpolation over water -- Make ! JWAT2 = 55 ! bigger than largest land use to disable PRECIP INTERPOLATION PARAMETERS Method of interpolation (NFLAGP) Default = 2 ! NFLAGP = 2 ! (1=1/R,2=1/R**2,3=EXP/R**2) Radius of Influence (km) (SIGMAP) Default = 100.0 ! SIGMAP = 100. ! (0.0 => use half dist. btwn nearest stns w & w/out precip when NFLAGP = 3) Minimum Precip. Rate Cutoff (mm/hr) Default = 0.01 ! CUTP = 0.01 ! (values < CUTP = 0.0 mm/hr) !END! ------------------------------------------------------------------------------- INPUT GROUP: 7 -- Surface meteorological station parameters -------------- SURFACE STATION VARIABLES (One record per station -- 100 records in all) 1 2 Name ID X coord. Y coord. Time Anem. (km) (km) zone Ht.(m) ---------------------------------------------------------- ! SS1 ='KEYW' 722010 1573.896 -1592.606 5. 10.0 ! ! SS2 ='KBKV' 722014 1431.621 -1166.874 5. 10.0 ! ! SS3 ='KNQX' 722015 1580.114 -1587.735 5. 10.0 ! ! SS4 ='KMTH' 722016 1641.772 -1559.674 5. 10.0 ! ! SS5 ='KMIA' 722020 1695.605 -1424.669 5. 10.0 ! ! SS6 ='KOPF' 722024 1695.590 -1415.097 5. 10.0 ! ! SS7 ='KFLL' 722025 1705.435 -1394.000 5. 10.0 ! ! SS8 ='KHST' 722026 1694.165 -1463.491 5. 10.0 ! ! SS9 ='KTMB' 722029 1685.687 -1445.775 5. 10.0 ! ! SS10 ='KPBI' 722030 1697.545 -1324.534 5. 10.0 ! ! SS11 ='KPGD' 722034 1504.199 -1331.963 5. 10.0 ! ! SS12 ='KHWO' 722037 1698.523 -1403.018 5. 10.0 ! ! SS13 ='KFXE' 722039 1700.959 -1379.508 5. 10.0 ! ! SS14 ='KMLB' 722040 1613.964 -1175.509 5. 10.0 ! ! SS15 ='KVRB' 722045 1646.253 -1223.058 5. 10.0 ! ! SS16 ='KTIX' 722046 1591.338 -1133.890 5. 10.0 ! ! SS17 ='KPMP' 722049 1706.961 -1374.579 5. 10.0 ! ! SS18 ='KMCO' 722050 1541.130 -1152.374 5. 10.0 ! ! SS19 ='KORL' 722053 1538.874 -1139.418 5. 10.0 ! ! SS20 ='KOCF' 722055 1441.615 -1085.610 5. 10.0 ! ! SS21 ='KDAB' 722056 1552.339 -1064.897 5. 10.0 ! ! SS22 ='KSFB' 722057 1542.431 -1112.226 5. 10.0 ! ! SS23 ='KJAX' 722060 1466.554 -930.123 5. 10.0 ! ! SS24 ='KNIP' 722065 1474.700 -959.020 5. 10.0 ! ! SS25 ='KNRB' 722066 1495.323 -936.529 5. 10.0 ! ! SS26 ='KNZC' 722067 1454.415 -964.265 5. 10.0 ! ! SS27 ='KCRG' 722068 1487.091 -945.552 5. 10.0 ! ! SS28 ='KDTS' 722069 1013.430 -1006.252 5. 10.0 ! ! SS29 ='KSAV' 722070 1482.798 -744.246 5. 10.0 ! ! SS30 ='KLHW' 722090 1453.096 -775.857 5. 10.0 ! ! SS31 ='KFPR' 722103 1654.239 -1238.777 5. 10.0 ! ! SS32 ='KSPG' 722104 1426.167 -1247.526 5. 10.0 ! ! SS33 ='KFMY' 722106 1523.672 -1366.986 5. 10.0 ! ! SS34 ='KRSW' 722108 1536.286 -1370.594 5. 10.0 ! ! SS35 ='KTPA' 722110 1432.440 -1223.713 5. 10.0 ! ! SS36 ='KSRQ' 722115 1440.887 -1287.067 5. 10.0 ! ! SS37 ='KPIE' 722116 1418.594 -1231.625 5. 10.0 ! ! SS38 ='KLAL' 722119 1482.780 -1213.659 5. 10.0 ! ! SS39 ='KCTY' 722120 1348.515 -1049.346 5. 10.0 ! ! SS40 ='KBOW' 722123 1506.341 -1213.475 5. 10.0 ! ! SS41 ='KAYS' 722130 1386.650 -858.488 5. 10.0 ! ! SS42 ='KAMG' 722135 1372.219 -828.844 5. 10.0 ! ! SS43 ='KBQK' 722136 1474.425 -843.801 5. 10.0 ! ! SS44 ='KSSI' 722137 1484.228 -853.429 5. 10.0 ! ! SS45 ='KTLH' 722140 1215.910 -980.285 5. 10.0 ! ! SS46 ='KGNV' 722146 1425.603 -1027.693 5. 10.0 ! ! SS47 ='KABY' 722160 1214.075 -852.793 5. 10.0 ! ! SS48 ='KVLD' 722166 1311.285 -923.097 5. 10.0 ! ! SS49 ='KAQQ' 722200 1160.452 -1063.168 5. 10.0 ! ! SS50 ='KVPS' 722210 1007.573 -997.592 5. 10.0 ! ! SS51 ='KSGJ' 722212 1511.613 -982.862 5. 10.0 ! ! SS52 ='KLEE' 722213 1488.445 -1117.635 5. 10.0 ! ! SS53 ='KCEW' 722215 1003.715 -964.293 5. 10.0 ! ! SS54 ='KPNS' 722223 943.818 -1004.742 5. 10.0 ! ! SS55 ='K40J' 722224 1296.124 -1006.326 5. 10.0 ! ! SS56 ='KNPA' 722225 932.565 -1020.909 5. 10.0 ! ! SS57 ='KNSE' 722226 956.847 -977.013 5. 10.0 ! ! SS58 ='KMOB' 722230 839.423 -992.977 5. 10.0 ! ! SS59 ='KBFM' 722235 857.471 -996.829 5. 10.0 ! ! SS60 ='KPFN' 722245 1091.028 -1017.492 5. 10.0 ! ! SS61 ='KEGI' 722246 1003.897 -979.230 5. 10.0 ! ! SS62 ='KLSF' 722250 1125.167 -773.136 5. 10.0 ! ! SS63 ='KCSG' 722255 1127.371 -754.092 5. 10.0 ! ! SS64 ='KMGM' 722260 995.181 -794.992 5. 10.0 ! ! SS65 ='KMXF' 722265 998.773 -785.267 5. 10.0 ! ! SS66 ='KTOI' 722267 1036.781 -838.595 5. 10.0 ! ! SS67 ='KDHN' 722268 1100.593 -901.875 5. 10.0 ! ! SS68 ='KOZR' 722269 1073.241 -901.508 5. 10.0 ! ! SS69 ='K79J' 722275 1007.929 -903.791 5. 10.0 ! ! SS70 ='KGZH' 722276 945.158 -899.692 5. 10.0 ! ! SS71 ='KAUO' 722284 1081.033 -749.038 5. 10.0 ! ! SS72 ='KNEW' 722315 674.172 -1078.342 5. 10.0 ! ! SS73 ='KNBG' 722316 677.719 -1104.227 5. 10.0 ! ! SS74 ='BVE ' 722320 741.996 -1153.463 5. 10.0 ! ! SS75 ='KMEI' 722340 774.911 -814.225 5. 10.0 ! ! SS76 ='KNMM' 722345 789.813 -788.601 5. 10.0 ! ! SS77 ='HBG ' 722347 738.183 -936.724 5. 10.0 ! ! SS78 ='KPIB' 722348 728.416 -915.165 5. 10.0 ! ! SS79 ='KASD' 722366 692.381 -1043.261 5. 10.0 ! ! SS80 ='KGPT' 747685 764.012 -1031.681 5. 10.0 ! ! SS81 ='KBIX' 747686 778.252 -1028.515 5. 10.0 ! ! SS82 ='KPQL' 747688 814.600 -1019.583 5. 10.0 ! ! SS83 ='KPAM' 747750 1102.720 -1032.935 5. 10.0 ! ! SS84 ='KMAI' 747760 1134.383 -976.323 5. 10.0 ! ! SS85 ='KHRT' 747770 992.523 -1006.748 5. 10.0 ! ! SS86 ='KSVN' 747804 1489.375 -754.398 5. 10.0 ! ! SS87 ='KVAD' 747810 1316.050 -901.585 5. 10.0 ! ! SS88 ='KMCF' 747880 1436.101 -1236.468 5. 10.0 ! ! SS89 ='KGIF' 747930 1507.697 -1201.828 5. 10.0 ! ! SS90 ='KTTS' 747946 1597.401 -1121.376 5. 10.0 ! ! SS91 ='KCOF' 747950 1616.504 -1161.780 5. 10.0 ! ! SS92 ='BURL' 994010 742.823 -1202.142 5. 10.0 ! ! SS93 ='VENF' 994220 1456.765 -1322.576 5. 10.0 ! ! SS94 ='GDIL' 994290 687.327 -1165.299 5. 10.0 ! ! SS95 ='CSBF' 994360 1129.187 -1074.705 5. 10.0 ! ! SS96 ='SPGF' 994390 1806.633 -1303.326 5. 10.0 ! ! SS97 ='SAUF' 994410 1519.846 -992.789 5. 10.0 ! ! SS98 ='DPIA' 994420 860.135 -1039.589 5. 10.0 ! ! SS99 ='MLRF' 994430 1703.797 -1515.581 5. 10.0 ! ! SS100='SMKF' 994450 1635.295 -1572.390 5. 10.0 ! ------------------- 1 Four character string for station name (MUST START IN COLUMN 9) 2 Six digit integer for station ID !END! ------------------------------------------------------------------------------- INPUT GROUP: 8 -- Upper air meteorological station parameters -------------- UPPER AIR STATION VARIABLES (One record per station -- 10 records in all) 1 2 Name ID X coord. Y coord. Time zone (km) (km) ----------------------------------------------- ! US1 ='EYW ' 12836 1573.896 -1592.606 5 ! ! US2 ='MFL ' 92803 1688.956 -1433.632 5 ! ! US3 ='JAX ' 13889 1467.865 -937.837 5 ! ! US4 ='TBW ' 12842 1450.306 -1251.292 5 ! ! US5 ='TLH ' 93805 1214.310 -982.767 5 ! ! US6 ='FFC ' 53819 1150.994 -657.420 5 ! ! US7 ='BMX ' 53823 957.073 -709.810 6 ! ! US8 ='SIL ' 53813 692.269 -1045.514 6 ! ! US9 ='JAN ' 03940 651.299 -826.026 6 ! ! US10 ='XMR ' 12868 1616.378 -1133.570 5 ! ------------------- 1 Four character string for station name (MUST START IN COLUMN 9) 2 Five digit integer for station ID !END! ------------------------------------------------------------------------------- INPUT GROUP: 9 -- Precipitation station parameters -------------- PRECIPITATION STATION VARIABLES (One record per station -- 92 records in all) (NOT INCLUDED IF NPSTA = 0) 1 2 Name Station X coord. Y coord. Code (km) (km) ------------------------------------ ! PS1 ='0001' 10008 1112.976 -861.704 ! ! PS2 ='0003' 10140 899.851 -812.449 ! ! PS3 ='0004' 10252 996.508 -906.245 ! ! PS4 ='0008' 10402 911.205 -930.730 ! ! PS5 ='0009' 10425 1078.298 -751.295 ! ! PS6 ='0014' 12124 1047.772 -735.181 ! ! PS7 ='0015' 12172 860.135 -1039.589 ! ! PS8 ='0016' 12377 1104.184 -905.127 ! ! PS9 ='0017' 12675 1054.344 -890.808 ! ! PS10 ='0019' 13519 977.559 -847.934 ! ! PS11 ='0024' 14193 860.847 -896.439 ! ! PS12 ='0025' 15112 909.221 -759.520 ! ! PS13 ='0026' 15397 1080.303 -809.503 ! ! PS14 ='0027' 15550 994.433 -795.079 ! ! PS15 ='0028' 15553 1012.715 -797.404 ! ! PS16 ='0030' 16370 922.493 -882.976 ! ! PS17 ='0031' 18178 864.924 -894.236 ! ! PS18 ='0033' 18323 1041.804 -844.606 ! ! PS19 ='0037' 18673 856.011 -757.134 ! ! PS20 ='0096' 80845 1703.038 -1359.763 ! ! PS21 ='0097' 80975 1360.739 -1008.353 ! ! PS22 ='0098' 81048 1431.621 -1166.874 ! ! PS23 ='0099' 82008 1341.505 -1046.684 ! ! PS24 ='0100' 82158 1554.172 -1064.573 ! ! PS25 ='0101' 82229 1531.985 -1087.271 ! ! PS26 ='0102' 82391 1323.394 -981.513 ! ! PS27 ='0103' 83186 1523.915 -1366.601 ! ! PS28 ='0104' 83538 1096.623 -934.223 ! ! PS29 ='0105' 84095 1676.754 -1463.461 ! ! PS30 ='0106' 84273 1405.547 -1107.588 ! ! PS31 ='0107' 84358 1467.217 -930.577 ! ! PS32 ='0108' 84802 1482.926 -1212.722 ! ! PS33 ='0109' 85076 1488.755 -1111.206 ! ! PS34 ='0110' 85237 1468.641 -1077.379 ! ! PS35 ='0111' 85391 1528.632 -1013.647 ! ! PS36 ='0112' 85612 1616.243 -1177.496 ! ! PS37 ='0113' 85879 1255.114 -959.679 ! ! PS38 ='0114' 85895 1596.776 -1325.578 ! ! PS39 ='0115' 86240 1009.346 -991.985 ! ! PS40 ='0116' 86323 1661.252 -1371.433 ! ! PS41 ='0117' 86628 1541.890 -1152.127 ! ! PS42 ='0118' 86842 1098.987 -1016.492 ! ! PS43 ='0119' 86880 1457.073 -1260.583 ! ! PS44 ='0120' 86988 1677.822 -1414.926 ! ! PS45 ='0121' 87440 1427.561 -985.625 ! ! PS46 ='0122' 87851 1452.494 -1178.174 ! ! PS47 ='0123' 87886 1426.829 -1247.877 ! ! PS48 ='0124' 88780 1644.099 -1440.546 ! ! PS49 ='0125' 88841 1690.009 -1519.277 ! ! PS50 ='0126' 89010 1677.913 -1433.476 ! ! PS51 ='0127' 89176 1457.542 -1318.561 ! ! PS52 ='0128' 89184 1566.510 -1296.374 ! ! PS53 ='0129' 89219 1643.751 -1219.394 ! ! PS54 ='0130' 89415 1094.552 -968.261 ! ! PS55 ='0131' 89795 1161.803 -951.950 ! ! PS56 ='0132' 90010 1289.575 -796.080 ! ! PS57 ='0135' 90211 1371.509 -828.620 ! ! PS58 ='0139' 90586 1184.078 -937.654 ! ! PS59 ='0140' 91340 1472.688 -853.385 ! ! PS60 ='0148' 92166 1128.129 -754.103 ! ! PS61 ='0149' 92361 1230.938 -814.682 ! ! PS62 ='0154' 93028 1161.790 -856.228 ! ! PS63 ='0155' 93312 1381.191 -922.696 ! ! PS64 ='0156' 93460 1430.869 -902.247 ! ! PS65 ='0158' 94204 1358.366 -790.992 ! ! PS66 ='0161' 94671 1428.977 -811.037 ! ! PS67 ='0166' 95394 1150.808 -805.536 ! ! PS68 ='0171' 96879 1344.272 -860.392 ! ! PS69 ='0173' 97847 1481.618 -742.984 ! ! PS70 ='0177' 98974 1305.135 -914.542 ! ! PS71 ='0432' 165624 698.594 -1129.111 ! ! PS72 ='0441' 168539 697.928 -1052.131 ! ! PS73 ='0477' 220797 767.492 -1027.223 ! ! PS74 ='0484' 221852 705.596 -897.598 ! ! PS75 ='0485' 221900 725.121 -804.871 ! ! PS76 ='0487' 222281 778.101 -763.653 ! ! PS77 ='0488' 222658 715.730 -767.371 ! ! PS78 ='0490' 222870 700.042 -733.204 ! ! PS79 ='0492' 223107 706.168 -821.767 ! ! PS80 ='0499' 224778 708.886 -747.303 ! ! PS81 ='0500' 224966 805.885 -943.780 ! ! PS82 ='0506' 226400 739.076 -742.482 ! ! PS83 ='0507' 226718 820.097 -1026.591 ! ! PS84 ='0508' 226816 681.338 -824.012 ! ! PS85 ='0510' 227220 725.020 -950.940 ! ! PS86 ='0511' 227276 701.769 -842.910 ! ! PS87 ='0512' 227444 767.415 -923.087 ! ! PS88 ='0515' 227592 749.072 -842.581 ! ! PS89 ='0519' 227840 763.369 -1005.595 ! ! PS90 ='0520' 228053 784.328 -865.479 ! ! PS91 ='0527' 229617 701.225 -992.105 ! ! PS92 ='0528' 229648 751.700 -982.279 ! ------------------- 1 Four character string for station name (MUST START IN COLUMN 9) 2 Six digit station code composed of state code (first 2 digits) and station ID (last 4 digits) !END!